Attach power source, Turn camera on, Press a (eject) button – Canon E 200 User Manual
Page 26: Press l^/lp button to select tape mode, Turn grip to desired position, Camera recording, 4. attach power source, Press, Eject) button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Camera Recording
PAUSE
0
:
00:00
2
.
3.
4.
Attach power source.
When using a battery pack, make sure it is fully charged
(see p. 15).
Turn camera on.
OPERATE indicator lights up.
_____
‘TAPE” flashes in viewfinder (see p. 30).
Press
A
(EJECT) button.
Video cassette compartment opens.
EJECT button works with the power turned off, if the battery
pack is attached.
Load video cassette and close video cassette
compartment.
Press “PUSH” mark on video cassette compartment until a
click sound is heard.
Use an 8mm video cassette marked with an
m
(P5 type).
Camera goes into record pause mode.
5.
6.
Press l^/LP button to select tape mode.
For best picture quality, select SP.
For double recording time, select LP.
Turn grip to desired position.
See p. 25 for adjusting grip.
26