Canon E 200 - Manual (Page 24)

Anaching Lens Cap Cord 24 - a
1. Pass the cord provided through the
loop on the lens cap.
2. Pass the grip belt through the ring
of cord. Then pass the grip belt
through the loop on the camera as
shown.
Removing and Attaching Lens Cap
and Lens Hood
24 - b
Remove lens cap before recording and hook it
onto grip belt using clip on lens cap. Replace
lens cap when you stop recording or turn the
camera off.
Q Focusing Ring
Q RIter (option)
B Lens Hood
D Lens Cap
To remove the lens hood;
Gently rotate it 60° counter-clockwise, as shown,
and remove.
To attach the lens hood:
Gently rotate it 60° clockwise until it clicks into
place.
• When using a filter, attach the lens hood in
front of the filter so that the lens cap can be
replaced.
Adjusting Grip Belt 24 -c
Tighten or loosen grip belt as necessary for a
comfortable fit. Hold grip with your right hand
while adjusting grip belt with your left.
24