Selecting video channel, Turn tv on, Turn camera on, and start playback – Canon E850 User Manual
Page 29: To view a regular tv programme
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting Video Channel
Video channel means the channel in your area which is not used by a
broadcasting station (Channel 30—39). If your TV does not have
audio/video input terminals, your TV set and the Video Channel Selector
of the RU-lOO RF Unit must be set to the video channel in order to view
playback.
Turn TV on.
Turn camera on, and start playback.
I I ^-1 I
0
Q 4-» >
/1
Set RF unit’s G/l Selector using a flat-edge screwdriver.
• I: England, South Africa, Hong Kong
G: Continental Europe
• If G/I Selector is set improperly, picture will appear, but no sound will be
heard.
Set TV and Video Channel Selector to video channel (Video
Channel Selector is factory-set to CH 32).
• For example, if video channel in your area is channel 33, tune TV to
channel 33, then use a flat-edge screwdriver to set Video Channel Selector
of RU-lOO to CH 33. Adjust tuning until picture is clear.
To View a Regular TV Programme
The RU-lOO RF Unit has an automatic signal selector which selects the
signal from the video camera whenever the camera is connected to the RF
unit and the power is turned on. To view a regular TV programme,
disconnect the camera from the RF unit, or turn the camera off.
P layback C onnection Procedure
27