Canon E850 - Manual (Page 58)

Creating Digital Titles
Handwritten titles and illustrations can be memorized and superimposed on
recordings, in a choice of eight colours.
Digital titles and graphics cannot be used at the same time. Selecting graphic
while digital title is selected causes digital title to be erased from memory.
■ I DIGITAL
MEMO
WHT
V J
Frame your image and press DIGITAL MEMO button.
• Everything within the frame will be memorized.
• You can adjust image density (see p.57).
2
SELECT—ON/OFF— P graphic I
press SELECT (graphic) button to select desired colour.
• Choose one of eight colours in either normal mode (colour image) or
reverse mode (clear image with colour background).
• Each time the SELECT (graphic) button is pressed, the colour display
changes as shown below.
<RED>
r. WHT- RED- CRN- BLU- YEL- SKY- VIO- BLK
R. BLK-R. VIO-R. SKY-R YEL-R BLU-R. GRN-R. RED-R. WHT-
• If you press the button for more than three seconds, colour goes into
“see-through” mode (the recorded scene is visible through the colour).
Viewfinder display appears in brackets.
• Press SELECT (graphic) button for three seconds or more to select normal
mode.
The image can be
superimposed as follows
Memorized image
(harrdwrilien lilies or tlluslralions)
# ta.»....... X
Normal Reverse
Recording scene
See-through Reverse See-through
Notes:
• Character titles can be superimposed over digital titles. If you use the same colour for character titles and digital
titles, you may have troubles distinguishing titles.
• For digital titles, your image should be thick and bold, otherwise it will appear faint, especially when using light
colours such as yellow or sky blue.
56
A dvanced Functions