Charging the battery, 1 connect the charger to a power outlet, Recharge the battery – Canon EOS-1D Mark IV User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Charging the Battery
<1 Connect the charger to a power
outlet.
• Connect the power plug to a power
outlet, and connect the power cord to
the charger.
• When no battery Is attached, all the
Indicator lamps will be off.
"%
Remove the protective covers
from the charger and battery.
• Remove the protective cover on the
charger by sliding it out.
Recharge the battery.
• Slide the battery into the charger's
slot as shown by the arrow, and make
sure it is securely attached.
« You can attach the battery to slot A or B.
► The battery will start recharging and
the green status lamp will blink.
► When the battery is fully charged, all
three Charge level Indicators will light
(50%/80%/100%).
• It takes approx. 2 hours to fully recharge
a completely exhausted battery.
• The time required to recharge the battery
depends on the ambient temperature
and battery's charge level.
28