The file numbering does not start from 0001, The shooting date and time displayed is incorrect, No image appears on the tv screen – Canon EOS-1D Mark IV User Manual
Page 255: The voice memo cannot be played, Sensor cleaning problems, The shutter makes a noise during sensor cleaning, Printing-related problems
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Troubleshooting Guide
The file numbering does not start from 0001.
• If you use a card which already has Images recorded, the file
numbering might start from the last Image In the card (p.88).
The shooting date and time displayed is incorrect.
• The correct date and time has not been set (p.49).
No image appears on the TV screen.
• Make sure the stereo AV cable or HDMI cable’s plug is connected all
the way in (p.170, 171).
• Set the video OUT format (NTSC/PAL) to the same video format as
the TV (p.170)
• Use the stereo AV cable that came with the camera (p.170).
The voice memo cannot be played.
• Set
[.W.C.Fn IV -9:
button function]
to
[2: Play memo (hold:
Record memo)]
(p 175, 231).
Sensor Cleaning Problems
The shutter makes a noise during sensor cleaning.
• If you selected
[Clean now
.'o], the shutter will make a noise three
times (p.184).
Printing-Related Problems
There are fewer printing effects than listed in the instruction manual.
e
What is displayed on the screen differs depending on the printer. This
instruction manual lists all the printing effects available (p.194).
255