Select, Select the custom function, Number – Canon EOS-1D Mark IV User Manual
Page 204: Change the setting as desired, Exit the setting, Clearing all custom functions, Setting custom functions, M e n u
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Custom Functions
C.Fn I.Exposure
C.FnIi: image/Flash exp/Disp
C.FnilI:Autofocus/'OriVe
C,FnR/:Operation/Oihers
Clear all Custom Func. (C.Fn)
C.Fn setting register/apply
Custom Function No.
C.Fn I :Exposure
Exposure level incremenis
0
'l/
3
--StOD set
1
/
3
-SiGO
CC
j
-'-O
l:l-stopset l/3-stop comp.
2:l/2~stopset l/2~stopcomp.
C.FnL'Expi^ure
Exposure level increments
O.i/3~slop set 1/3-siopcomp.
l:l-stopset 1/3-stop comp,
12:l/2-stop set 1/2-stop comp.
Select
• Turn the < > dial to select the [,??,] tab.
Select the group.
• Turn the <0> dial to select C.Fn I -
IV, then press
<
0
>.
Select the Custom Function
number.
• Turn the <0> dial to select the
Custom Function No., then press
<©>.
Change the setting as desired.
• Turn the <Q> dial to select the
setting (number), then press <©>.
• Repeat steps 2 to 4 if you want to set
other Custom Functions.
• At the bottom of the screen, the current
Custom Function settings are indicated
below the respective function numbers.
Exit the setting.
• Press the
< M E N U >
button.
► The screen for step 2 will reappear.
Clearing All Custom Functions
In step 2, select
[Clear all Custom
Func. (C.Fn)] to clear all the
Custom Function settings.
Q Even if all the Custom Functions are cleared, the setting for
[.ii.C.Fn IV
-12;
Focusing Screen]
will remain unchanged. The registered settings for
[.Sf.C.Fn I
-16;
AE Microadjustment], [.Sf.C.Fn I
-17;
FE
Microadjustment],
and
[.W.C.Fn III
-7;
AF Microadjustment]
will also be
retained but
[0; Disable]
will be set.
204