Canon EOS-1D Mark IV - Manual (Page 101)

DRIVE:
Selecting the Drive Mode
1 Press the <AF*DRIVE> button.
(
66
)
Select the drive mode.
• While looking at the top LCD panel,
turn the <0^ dial.
□ : Single shooting
When you press the shutter button completely, one shot will be
taken.
Qi'^ : High-speed continuous shooting (Max. 10 shots per sec )
Qj|_: Low-speed continuous shooting (Max. 3 shots per sec.)
In the QjH and QJ il modes, the camera will shoot continuously
while you hold down the shutter button completely.
: 10-sec. self-timer
Ci) 2 : 2-sec. self-timer
See the next page for the self-timer operation procedure.
S : Silent single shooting
The shooting sound for single shooting is quieter than < □ >. The
internal mechanical operation is not executed until you return the
shutter button to its halfway position
(I
When the battery level is low. the drive mode icon <Q|H/QiL/n> will
blink. If the <y|H> Icon blinks, the continuous shooting speed will
decrease slightly.
In the Al Servo AF mode, the continuous shooting speed may become
slightly slower depending on the subject and the lens used.
101