Imib setting the jpeg quality (compression rate), L/m1/m2/s, Select [jpeg quality – Canon EOS-1D Mark IV User Manual
Page 63: Select the image size, Set the desired quality (compression rate), Setting the jpeg quality (compression rate)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Image-recording Quality
IMIB Setting the JPEG Quality (Compression Rate)
The recording quality (compression rate) can be set for each image size
L/M1/M2/S.
Select [JPEG quality].
® Under the [O'] tab, select [JPEG
quality], then press <@>.
Select the image size.
• Turn the <0^ dial to select the
image size, then press <©>.
Set the desired quality
(compression rate).
• Turn the <0> dial to select the
setting, then press <©>■
• The higher the number, the higher the
quality will be (lower compression).
• For 6 -10, <i> is displayed.
For 1 - 5, < J> is displayed.
Q The higher the recording quality, the fewer the number of possible shots will
be. On the other hand, the lower the recording quality, the higher the
number of possible shots will be.
63