Installing and removing the battery, Installing the battery, Removing the battery – Canon EOS-1D Mark IV User Manual
Page 32: Insert the battery, Pull out the battery, Installing and removing the card
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing and Removing the Battery
Installing the Battery
Insert a fully charged Battery Pack LP-E4 into the camera.
Removing the Battery
cap.
Insert the battery.
• Insert the battery firmly all the way,
and turn the release handle as shown
by the arrow.
^ Flip out the battery release
handle and turn It as shown by
the arrow.
Pull out the battery.
• To prevent shorting, be sure to attach
the protective cover (p.24) to the
battery.
• When not using the camera, attach
the battery compartment cap (p.19).
Q If the battery’s rubber lining (to repel water) is not clean, use
a moist cotton swab to wipe it clean.
Rubber lining
32