Attaching battery pack 1^1, Removing battery pack ict51, Slide and hold the ватт eject switch – Canon E 333 D User Manual
Page 17: Pull the battery pack out as shown
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
-
-Caution
--------------------------------------------------------------
Be sure to turn the camera off (the OPERATE
ш ^
?^.
1
indicator goes off) before removing the battery pack.
Removal during operation may cause damage.
Attaching Battery Pack 1^1
1. Slide the battery pack into the
power source compartment.
• Insert the end marked with a triangle.
• Slightly loosen the grip belt and press it down
for easy battery loading.
2. Press the battery pack until it clicks
and locks in place.
Removing Battery Pack ICT51
1. Slide and hold the ВАТТ EJECT
switch.
2. Pull the battery pack out as shown.
ro
>
о т
о
о
и
m
л
>
н
о
о т
17
Advertising