Canon E 333 D User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Inserting a New Lithium Battery

The CR2025 lithium battery provides your
camera with enough power to store character
tities, date and time, and an age, even when the

camera is turned off.
One iithium battery wiii iast approximately one

year. (Life span varies slightiy according to
ambient conditions.) When the iithium battery is

not in piace or is neariy exhausted, “DATE”

fiashes in the viewfinder indicating that the iithium

battery needs to be replaced.
Be sure to connect a power source to the camera

before changing the iithium battery, otherwise the

tities, date and time, and age will be cleared from
the camera’s memory and will have to be reset.

Inserting Procedure

1. Press the GRIP UNLOCK button

and rotate the grip downward.

2. Hold the camera with the battery

pack facing down, then draw out

the lithium battery holder.

• If the camera is heid with the battery pack

facing up, the iithium battery wili drop out
when the lithium battery hoider is removed.

3. Insert a new lithium battery into the

lithium battery holder with the +

side facing up.

4. Snap the lithium battery holder

back into the compartment.

Warning

The battery used in this device may present a fire or
chemical burn hazard if mistreated. Do not recharge,
disassemble, heat above 100°C or incinerate.
Replace the battery with Sanyo CR2025, Panasonic
CR2025 or Duraceli DL2025B. Use of another battery
may present a risk of fire or explosion. The used
battery should be handed back to the supplier for safe

disposal.

Caution

-------------------------------------------------------------

• Make sure the plus (+) side is facing up in the

lithium battery compartment.

• Keep the battery out of children’s reach. If

swallowed, contact physician immediately.

• To ensure proper contact, wipe the battery with the

clean, dry cloth before use.

• Do not pick up the battery using tweezers or other

metal tools which may cause short circuiting.

• Do not disassemble, heat or immerse in water, to

avoid risk of explosion.

Advertising