Vìdeo cassette notes, Video cassette erasure prevention switch, Metal • hg – Canon E 333 D User Manual
Page 24: Video cassette notes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Vìdeo Cassette Notes
• Do not leave a cassette in the camera after
use, especially when the camera will not be in
use for a long time.
• There are several holes on the cassette back,
which are used for transferring information. Do
not cover them.
• Do not use cassettes with damaged or spliced
tape or ones that do not meet standards.
Video Cassette Erasure Prevention
Switch
To prevent accidental erasure of recorded
material, slide the switch at the bottom of the
cassette to the “SAVE” or “ERASE OFF" position,
as shown.
Returning the switch to the “REC” or “ERASE
ON” position enables recording again.
Refer to the cassette instructions for further
information on erasure prevention.
• “TAPE” flashes in the viewfinder if you try to
record on a cassette that has been set for
erasure prevention. Use another cassette or set
the switch to enable recording.
Metal • HG
Standard 8 mm MP W151
O In the “SAVE” or “ERASE OFF” position:
Erasure Prevention
e
In the “REC” or “ERASE ON” position:
Recording Possible
24