Canon E 333 D - Manual (Page 18)

Charging Battery Pack KTTO
Use the CA-100 Compact Power Adapter or the
optional CB-110 Car Battery Adapter to charge
the battery pack.
Connect the battery pack to the CA-100 (or
CB-110) as shown and plug into a mains outlet
(or car cigarette lighter socket).
When the operate indicator (green) is glowing
steadily and the charge indicator (red) is blinking,
charging has begun. When the battery pack is
fully charged, the charge indicator will glow
steadily. Disconnect the battery pack from CA-
100 (or CB-110).
O Battery Pack
O CA-100 Compact Power Adapter or
CB-110 Car Battery Adapter
0 Charge Indicator
O Operate Indicator
• Always disconnect the DC-100 DC Coupler
from the CA-100 (or CB-110) before charging
the battery pack.
• Battery pack charging times are shown below.
Charging time will vary according to the
ambient temperature.
• When you don't expect to use the battery pack
for a long time (three months or more), store it
in a discharged condition. Storing the battery
pack in a charged condition will shorten its
operating life.
• The optional MC-100 Multi-battery Charger can
also be used.
For further information, see the adapter or
charger instruction manual.
Battery Pack Continuous recording time Charging time
(approximate minutes) (approximate minutes)
BP-E77K 55 70
BP-E718 100 120
BP-E722/BP-E722D 115 130
18