I imprinting the date or time (date model only), Setting the date and time, Set the correct number – Canon Rebel T2 300X User Manual
Page 28: Imprinting the date or time (date model only), I imprinting the date or time
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I Imprinting the Date or Time
(
date
Model only)
Setting the Date and Time
o|
Move the <^> arrow to
<G
2
Select the digit to be set.
• Press the <SET> button.
• The digit selection will change in the
following sequence; year, month, day,
hour, minute, ”!"
Set the correct number.
' • Turn the dial.
• Repeat steps 2 and 3 until all the date and
lime digits are set correctly.
4
Finalize the date and time setting.
• Keep pressing the <SET> button until no
digits are blinking.
• If you press the < SET> button while"! ” is
blinking, 0 sec. will be set.
o If a picture is taken while the date and time are blinking, the date and time will
not be irrprinted on picture.
1^ Thedaieandt^eettingcanberetainedforabout10rTvi.afterthecamefa’s
bfittedes are remoMed.
26