Canon Rebel T2 300X - Manual (Page 47)

Av : Use this mode if you want to set the flash aperture value. The camera will
set the flash sync speed (within 30 sec -1/125 sec.) automatically to
obtain the best exposure for the aperture you set For portraits with a
night scene or dark background, a slow sync speed will be set to obtain
a proper exposure for both the subject and background. The flash
illuminates the subject, while the background is properly exposed with a
slow shutter speed.
• Because automatic slow-sync shooting uses a slow shutter speed,
always use a tripod.
• If you do not want long exposures, set C Fn-06. (p 48)
M ; You can manually set both the flash sync speed (within Bulb -1/125 sec.)
and aperture value, The subject is properly exposed with the flash and the
background is exposed with the flash sync speed and aperture value you
have set,
A-DEP ; The result will be the same as using the <P> mode-
Using the Built-in Flash
Rash Distance Range (With EF28-90mm f/4-5.6) (nVfl]
ISO
20mm 90mm
Neqalive Film Slide Film Negative Film Slide Film
100 1-46/33-152 1 -3.3/3.3-109 1 -33/3 3- 10 9 t -2 3/3 3- 76
400 1 - 9 2 / 3 3 ■ 30 4 1 2-66/39-21.5 1 - 6 6 / 3.3 - 21 0 1-46/3.3-152
• V^t)en using the built-in flash, stay at least 1 metre/3.3 feet away from the
sub^. Otherwise, part of the ptuto will loc^ dark.
• Wh^ using the built-in flash, detach any hood attached to the lens. A lens
hood will partlaBy otetnjct №e flash coverage.
• When a super tdephoto tens or a fast, la^ge^iperture lens is attached, the bult-
in flash coverage might be obstructed.
• The built-in flash’s flash coverage is 26mm lens ang^e. •
• To retract the built-in flash, pi^ it down.
• This is a Type-A camera (compatible with E-TTLII autoflash) wNch can use all
the features EX-series Spe^it^.
45