Fe lock, Ae lock, Using the built-in flash – Canon Rebel T2 300X User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Built-in Flash
*FE Lock*
FE (Flash Exposure) lock is for setting the correct flash exposure for any part of
the subject. First pop-up the built-in flash
1
Focus the subject.
• Keep pressing the shutter button until
step
3
.
Aim the viewfinder centre over the
target subject, then press the
<-^>
button.
► A preflash is fired and the <-X-> icon will
be displayed in the viewfinder
Compose the shot and take the
picture.
O * lfthesubjectisbeyondtheeffectiveflashrangeresultinginundere)qxisure,the
<V> icon will blirri<. Get closer to the siiiject and repeat steps 1 ^2.
• For the external Speedite. use an EX-series Speedlite. If the camera is used
with an EZ-, E-, EG-, ML-, or TL-series Speedlite, the flash will not fire in the
TTL and A-TTL ^oflash modes. Use the manual flash rrxxje if the ^»edlite
hasor^.
Aboiri E-TTLII Autoflash
E-TTLII is a new autoflash exposure system incorporating Improvedfla^
exposure control and lens foetidng distarx:« information, making it more precise
№an the previous E-TTL (evaluative flash metering with preflash) sy^em.
The camera c^ execute E-TTL II autoflash with any EX-series Speedlite.
46