Attaching battery pack ieq, Slide battery pack into power source compartment, Removing battery pack – Canon E 600 User Manual
Page 14: Slide and hoid ватт eject switch up, Puii battery pack out, as shown, Using battery pack
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Attaching Battery Pack IEQ
1. Slide battery pack into power
source compartment.
• Insert the end marked with a triangle.
• Slightly loosen grip belt and press it down
for easy battery loading.
2. Press battery pack until it clicks
and locks in place.
Removing Battery Pack
г Caution-
Be sure to turn camera off (the OPERATE indicator
goes off) before removing battery pack. Removal
during operation may cause damage.
1. Slide and hoid ВАТТ EJECT
switch up.
2. Puii battery pack out, as shown.
14
Advertising
This manual is related to the following products: