Tape return, Press ■ (stop) button when playback finishes, Press tape return button – Canon E 600 User Manual
Page 75: Press ► (play) button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tape Return
Tape return allows you to quickly return to a desired scene on the
video cassette.
• Camera does not have a TAPE RETURN button. Use the
wireless controller to operate tape return.
1. When you locate a scene during playback that
you want to watch again later, press COUNTER
RESET button.
• Tape counter resets to 0:00:00.
2. Press ■ (STOP) button when playback finishes.
3. Press TAPE RETURN button.
• Tape rewinds and stops automatically when counter reading
reaches near 0:00:00.
4. Press ► (PLAY) button.
• Playback starts at the spot where you pressed COUNTER
RESET button.
$
DO
>
O
N o te s:
•
Every time you load a video cassette, the tape counter automatically resets to 0:00:00. This means that
after recording you can use the tape return function to locate the recording start point.
• Tape counter reading is only approximate. Use it as a guide.
• Tape return does not function when tape counter reading is near 0:00:00.
• Press ■ (STOP) button to cancel tape return.
75