Canon E 600 User Manual
Page 66
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
□
13
The RU-100 RF Unit is required in order to view
recorded video cassette on a TV which does not
have audio/video input terminals. There are two
models of RU-100, one for Europe and one for
Australia. The connection and setting procedures
for the two models differ.
On a TV without audioA/ideo input terminals both
the E400 and E600 play back in monaural.
Using TV without AudioA/ideo Input
Terminals (European Model)
RU-100 EiCT
B Connection Plug
Q G/l Selector
B Video Channel Selector
B
FROM ANT. Terminal
B TO TV Terminal
Coaxial Cable with DIN-Connectors
B
rnale
B
female
Connection Procedure
1. Connect RF Unit to camera.
2. Attach aerial cable to FROM ANT.
terminal, and connect female
connector to TO TV terminal of RF
unit.
• Please note the difference between ‘male’
and female’ type DIN-connectors on coaxial
cable.
3. Connect male connector to aerial
input terminal of TV.
To View a Regular TV Programme
The RU-100 RF Unit has an automatic signal
selector which selects the signal from the video
camera whenever the camera is connected to the
RF unit and the power is turned on. To view a
regular TV programme, turn the camera off or
disconnect it from the RF unit.
66