Canon E 600 User Manual
Page 68
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using TV without AudioA/ideo Input
Terminals (Australian Model)
RU-100
Q Connection Plug
D Video Channel Selector
H TO TV Terminal
Q FROM ANT. Terminal
Coaxial Cable with DIN-connectors laasi
Q male
Q female
Connection Procedure
1. Connect RF Unit to camera.
2. Attach aerial cable to FROM ANT.
terminal, and connect female
connector to TO TV terminal of RF
unit.
• Please note the difference between ‘male’
and female’ type DIN-connectors on coaxial
cable.
3. Connect male connector to aerial
input terminal of TV.
To View a Regular TV Programme
The RU-100 RF Unit has an automatic signal
selector which selects the signal from the video
camera whenever the camera is connected to the
RF unit and the power is turned on. To view a
regular TV programme, turn the camera off or
disconnect it from the RF unit.
68