Canon DR-5060F User Manual
Page 30
28
MEMO
If the setting of the side to be scanned differs from the camera unit currently in
use in the Backup mode, the following confirmation message is displayed when
you click [Start Scanning].
●
When the 1/57 camera unit is used and [Simplex] is selected
The images on both sides are backed up to film even if scanning is performed
with [Simplex] selected and the 1/57 camera unit in use.
●
When the 1/24 camera unit is used and [Duplex] is selected
The images on the front side of the original are backed up to film when
scanning is performed with [Duplex] selected and the 1/24 camera unit in use.
●
When the 1/24 camera unit is used and [Backside scanning] is selected
(See “Backside scanning” P. 56)
The 1/24 camera unit is exclusively for photography of the front side. The
images on the front side of the original are backed up to film even when
scanning is performed with [Backside scanning] selected.
4
Set [Separator].
Scanning Originals and Saving Scanned Images