Canon DR-5060F - Manual (Page 8)

6 System Requirements
System Requirements
You must have the following hardware and OS for Scanning Utility 5060 to work.
● An IBM PC/AT or compatible computer with a Pentium 133 MHz CPU or
faster and at least 64 MB of memory
• OS: Microsoft Windows ® 95/98/Me or Microsoft Windows NT ® 4.0
Workstation, Microsoft Windows ® 2000 Professional
• At least 100 MB of hard disk space (at least 5 MB at installation)
● An SVGA compatible display
● A Microsoft Windows compatible keyboard, mouse and printer, CD-ROM
drive (4
×
speed or faster recommended)
● A SCSI card whose operation has been confirmed
Operation of the following SCSI cards has been confirmed:
Adaptec AHA-2930 series and AHA-2940 series
● SCSI-2 compatible SCSI cable
MEMO
● Scanning Utility 5060 uses a dedicated scanner driver. Scanner drivers such
as the ISIS driver and TWAIN driver are not required.
● When you install Scanning Utility 5060, another folder “\ceiscan” is created
under the Windows folder in addition to the installation destination folder,
and the file “cei*.dll” is copied to \Windows\system.
Scanning Utility 5060 will not function properly if these files are modified.
● Scanning Utility 5060 uses “wnaspi32.dll” for controlling the scanner. The
scanner will not operate if “wnaspi32.dll” is not correctly installed.
NOTE
When Scanning Utility 5060 is used, set the scanner to the Backup mode or
the Scanner Only mode. If Scanning Utility 5060 is used in the Filmer only
mode, an error message is displayed when scanning is started.