Canon DR-5060F - Manual (Page 51)

49
Scanning a Document
2
◆ Changing Scan Mode by Function Sheets
The scan mode can be automatically changed when a function sheet inserted
between original pages is detected. There are four types of function sheets: for
Text mode, for Photo mode, for Duplex mode, and for Simplex mode. Insert the
function sheet to match the scan mode you are using to scan originals.
For Text mode
When this sheet is detected, the scan mode is changed
to the Text mode (black-and-white) from the next original
page. Note, however, when the grayscale is selected as
the scan mode, the pattern in this function sheet is
ignored, and is scanned as an image together with
other original pages.
For Photo mode
When this sheet is detected, the scan mode is changed
to the Photo mode (error diffusion) from the next original
page. Note, however, when the grayscale is selected as
the scan mode, the pattern in this function sheet is
ignored, and is scanned as an image together with
other original pages.
For Duplex mode
This sheet changes the scan mode to the Duplex mode
from the next original page.
For Simplex mode
This sheet changes the scan mode to the Simplex
mode from the next original page.
MEMO
● Copy the function sheet onto paper of the same size as the original before
use.
● When using the function sheet, insert the copy of the function sheet in front
of the sheet at which the scan mode is to be changed.
● When the scanner is used in the Backup mode, the content of the function
sheet is photographed to film.
Other Scan Operations
(Example of how to use
function sheet)
Insert the copy of the function sheet in
front of the sheet at which the scan mode
is to be changed.