Canon DR-5060F - Manual (Page 66)

64
MEMO
● Double feed detection is performed taking the thickness and length of the
first sheet of the document as the standard sheet. When the first sheet of
the document is fed, the scanner memorizes the thickness and length of the
document.
● Double feed cannot be detected on originals 130 mm (5.0 in.) wide or less.
Feeding Option
Selects the feed method.
[Remote]
The document starts to be fed (scanned) when you load the document and
instruct scanning in the application.
[Semi Auto]
The document is fed (scanned) when scanning is instructed in the application
and when you load the document and press the Start key.
[Auto]
The document is fed (scanned) automatically when scanning is instructed in
the application and you load the document.
[Manual]
The document is fed manually one page at a time after scanning is instructed
in the application. Use this when scanning particularly thick or thin pages.
MEMO
The setting you make here is reflected in the scanner’s operation panel when
you press the [OK] button in the Scanner Settings dialog box and the dialog
box is closed. It is also reflected in the Feeder Option panel when the setting is
changed on the operation panel.
Verify Scan
Verify the number of pages counted before the document is scanned against the
actual number of scanned pages. If the numbers differ, an error is displayed.
For details on the verify scan procedure, see “Verify Scan” p.45. To perform a
verify scan, mark the Verify Scan check box.
[Default] button
Returns the settings in the Feeder Option panel to their defaults.
[OK] button
Enables the settings and closes the dialog box.
[Cancel] button
Cancels any settings you have set, and closes the dialog box.
Setting Scan Conditions