Install the camera in lan – AVer SF1311H-CP User Manual
Page 11
Advertising
7
Install the Camera in LAN
1. Plug an Ethernet cable into the Camera
Connect an Ethernet cable to the LAN socket and attach it to the network.
2. Connect the external power supply to Camera
Connect the attached power adapter (12VDC) to the DC power jack and wall outlet.
Once you have finish installed the camera, the power LED will light on. It means the system is booting up
successfully. And if you have a proper network connection, the LAN LED will flash in blue under wire mode.
Ethernet Cable
Power Cable
Advertising