AVer SF1311H-CP - Manual (Page 49)

45
E-Mail: Setup E-Mail Configuration
You may setup SMTP mail parameters for further operation of Event Sch edule. That‟s, if users want to send
the alarm message out, it will need to configure parameters here and also add at least one event schedule to
enable event triggering.
 SMTP Server: Enter SMTP server name or the IP address of the SMTP server.
 Test: Send a test mail to mail server to check the account that user has entered is available.
 SMTP Port: Set port number of SMTP service.
 SMTP Authentication: Select the authentication required when you send an e-mail.

Disable: Send e-mail without authentication.

Enable: Send e-mail with authentication.
 Authentication User name: Enter the user name for the SMTP server if Authentication is Enable.
 Authentication Password: Enter the password for the SMTP server if Authentication is Enable.
 E-mail To: Enter t
he receiver‟s e-mail address.
 E-mail From: Enter the sender‟s E-mail address. This address is used for reply e-mails.
 E-mail Subject: Enter the subject/title of the e-mail.