AVer SF1311H-CP - Manual (Page 39)

35

Current Value: The current Intensity value of the light. The red mark on the scroll bar represents the
current value of light‟s intensity.

Night Mode Threshold: Set a threshold value for IP camera to switch to Night mode. The darker
gray mark on the scroll bar represents the Night Mode Threshold value.

Day Mode Threshold: Set a threshold value for IP camera to switch to Day mode. The lighter gray
mark on scroll bar represents the Day Mode Threshold value.
[Note] 1. When the Current Value is great than Day Mode Threshold value, the IP camera will switch
to Day mode.
2. When the Current Value is less than Night Mode Threshold value, the IP camera will switch
to Night mode.
3. When the Current Value is between Night and Day Mode Threshold value, the IP camera
will stay in current mode.

Delay Time: A time gap period before mode switching.

Default Settings: Set all value back to factory default values.
Preset Setting
This page provides the edit tool to modify or delete the “Preset Setting” item by item.