AVer SF1311H-CP - Manual (Page 33)

29
PPPoE
It allows your device with xDSL or cable connects with broadband network directly, then your device can dial
up and get a dynamic IP address.
The device can directly connect to the xDSL, however, it should be setup on a LAN environment to program
the PPPoE information first, and then connect to the xDSL modem. Power on again, then the device will dial
on to the ISP connect to the WAN through the xDSL modem.
The procedures are:
 Connect to a LAN by DHCP or Fixed IP

Access the device, enter Setting  Network  PPPoE as below:
 PPPoE: To enable or disable the PPPoE service.
 User name: Type the user name for the PPPoE service which is provided by the ISP.
 Password: Type the password for the PPPoE service which is provided by the ISP.
 IP address, Subnet mask, and Gateway (read only): The IP information got from PPPoE server site.

Status: The status of PPPoE connection.