Maintenance, Warning – AVer SF1311H-DV User Manual
Page 38
34
Maintenance
Default Settings (Including the Network Setting): Recall the device hard factory default
settings. Note that click this button will reset all device‟s parameters to the factory settings
(including the IP address).
Default Settings (Except the Network Setting): The unit is restarted and current settings are
reset to factory default values except the network setting.
Backup Setting: This button will backup all of the current system parameters.
Restore Setting: C
lick the “Browse” button to select the backed up files and then click the
“Restore Setting” button. The settings will be restored to the previous saved configuration.
Firmware Upgrade:
The device supports new firmware upgrade (the software that controls
the operation in the device). Please contact your dealer for the latest version if necessary.
System Restart: The device is restarted without changing any of the network settings. It
means the IP address of the device will not change after firmware upgrade.
Download the latest firmware file from our website or your dealer. Unzip this firmware file to binary
file and store it into your PC. Then follow the steps as below carefully:
1.
Close all other application programs which are not necessary for firmware update.
2. Make sure that only you access this device while firmware updating.
3. Disable Motion Detection function.
4.
Click “Browse” button. Select the Firmware binary file.
[Note] Please make sure that the Firmware only applies to this device, once update, it will be
burned into FLASH ROM of system.
5.
Once the firmware file was selected, click “Firmware Upgrade” button.
6. The upgrade progress information will be displayed. Once the uploading process completed,
the device will reboot the system automatically.
7. Please wait for timer countdown, and then you can use IPWizard II to search the device again.
WARNING
The download firmware procedure cannot be interrupted. If the power and/or network
connection are broken during the download procedure, it might possibly cause serious
damage to the device.