CASO Germany HCMG25 - Manual (Page 61)

caso HCMG 25 61
13.6 Quick start
1) Quick start of the microwave: You can start the mircowave diectly with
full power for any period of time.
Use to set the time and then press START directly to start
the microwave on full power.
2) Press START in standby mode to heat food at full power for 30
seconds. Press START again to increase the time by 30 seconds
which each pressing, the maximum is 95 minutes.
3) In all microwave, grill convection and combination programmes it is
possible to increase the time in 30 second increments by pressing
START (repeatedly) also after a programme has been selected and
confirmed.
Attention: This function is not available for the defrosting and the automatic cooking
programmes.
13.7 Stop / Pause
In order to interrupt an ongoing cooking programme, you can proceed as follows:
Pres the STOP/CLEAR button once. The cooking programme that is in use
will be stopped.
Open the door of the device. The cooking programme that is in use will be
stopped.
Please note
►
To continue the interrupted cooking program, press the button START
after closing the door.
To terminate the interrupted program, press the button STOP/CLEAR a
second time.
Please note
►
Before beginning a different cooking process you must delete the
display and reset the system by pressing the button STOP/CLEAR.
13.8 Setting the clock
As soon as the appliance is connectied to electrical power the display
will show 0:00 and the buzzer will sound once.
1) Press CLOCK/KITCHENTIMER once, 00:00 is displayed.