CellarPro 1800XT-220V WARRANTY SERVICE, 11402 - Manual (Page 22)

21
 The LA2 Alarm has been triggered
As noted above, the cooling unit is designed to measure the temperature of the
condenser coils and, if the temperature drops below a certain point, the LA2 alarm
will display on the control panel. To reduce the alarm temperature setting, do the
following:
1. Depress the “Set” and “Down” button for three seconds until the display
reads “HY”
2. Depress the “Set” and “Down” button (again) for seven seconds until “PR2”
flashes on the display
3. Using the “Down” button, scroll until the display reads “AL2”
4. Depress the “Set” button and lower the alarm temperature setting to your
desired temperature