CellarPro 6200VSi User Manual
Page 17
17
V9.14
S w i t c h I n s t r u c t i o n s
(1)
Control Panel: Maintains desired cellar environment. Factory settings
are optimized for peak performance. Controller is described in detail
in the following section.
(2)
Fan Speed Selector Switch (Low/High): The cooling unit fans
operate on 2 speed settings: Low or High. For optimum sound and
energy efficiency, select the lowest fan speed that will maintain the
desired cellar temperature. High speed is recommended for initial
cellar pull down, extreme temperature conditions and ducted
installations.
(3)
Condensate Evaporator Switch (OFF/ON): When in the “on” position,
the switch will illuminate indicating the condensate evaporator is
energized to remove moisture collected in the unit’s condensate
drain pan. The switch light may cycle off and on indicating a low
moisture environment. If this condition is observed, or if no