CellarPro 6200VSi - Manual (Page 21)

21
V9.14
Remote Control / Display Instructions
Digital
Display
Quick Chill
Button
Button
Icon
Auto
Defrost
Mode
Manual
Defrost
Light
Energy
Saver
The temperature displayed on the control is red instead of blue.
To activate the “Quick Chill” mode, press the “Up” button for three seconds.
To deactivate “Quick Chill”, press the “Up” button for three seconds again.
The “Quick Chill” indicator (Row 3) light will turn on when the cooling unit is
in “Quick Chill” mode,
In the “Quick Chill” mode, the cooling unit will run continuously for 6
hours (or until the unit reaches set point.). This mode is useful after
loading “warm” bottles in the cabinet.
The cooling unit has a factory default defrost cycle that initiates every
16 hours for 20 minutes. When the cooling unit is in auto-defrost
mode, the “Defrost” Indicator light (Top row) will turn on, and the
evaporator fan will run.
Hold the defrost button in for 3 seconds to initiate a manual defrost. The
“Defrost” Indicator light (Top row) will turn on for a 20 minute defrost
cycle.
The light button function is disabled, however pressing it will turn
on/off the light indicator on the display (2nd row).
The remote display is not configured with an Energy Saver mode.
The set point can be raised manually for periods where energy savings
is desired.