BoonDocker ARCTIC CAT: 2012-14 ProClimb M8 Intercooled User Manual
Page 11
BoonDocker tollfree: 877-522-7805 local: 208-542-4411 fax: 208-524-7381 www.boondockers.com 11
55. Attach the oil pump to the belly pan in front of the
turbo using the the attached velcro.
56. Connect the oil pump to the previously installed
power adaptor. Remove the intercooler fan extension
from the fan and install into the same adaptor.
57. Install the 90 rubber boot underneath the chassis di-
agonal and onto the turbo inlet. The boot does not
need to be clamped to the turbo. The fit is tight so
this step will require patience.
58. Route the boost line from the push to connect fit-
ting on the intercooler underneath the ECU and heat-
shield.
59. Install the 3”x4” silicone tube and clamps onto the
torque tubes.
60. Cut the inner airbox so that the torque tubes will clear.