BoonDocker ARCTIC CAT: 2012-14 ProClimb M8 Intercooled - Manual (Page 6)

25. Install the supplied connector onto the temp sensor.
26. Seal the temp sensor with silicone and attach the
temp sensor to the torque tubes using the supplied
screws.
27. Install either the 90 pust to connect or transducer into
the torque tubes. Kits equipped with an EBC come
with push to connect and without an EBC a pressure
transducer.
28. Install the torque tube elbow onto the PTO side throt-
tle body.
29. Install the keeper flange onto the torque tube and
secure it with the stock fasteners to the fuel rail.
30. Move the MAG side torque tube into position and at-
tach it to the PTO side torque tube using the 3”x3” sili-
cone tube. Attach the torque tube to the throttle body
and secure using the keeper flange.
BoonDocker tollfree: 877-522-7805 local: 208-542-4411 fax: 208-524-7381 www.boondockers.com 6