BoonDocker ARCTIC CAT: 2012-14 ProClimb M8 Intercooled - Manual (Page 12)

BoonDocker tollfree: 877-522-7805 local: 208-542-4411 fax: 208-524-7381 www.boondockers.com 12
61. Install the inner airbox onto the machine and push the
intercooler into the silicone connector. Push the as-
sembly backwards until the holes on the inner airbox
line up.
62. Install the silicone reducer onto the turbo charger.
Install the silicone connector onto the charge tube
and connect to the intercooler. Sercure using the
supplied clamps.
63. With BoonDocker EBC: Mount the EBC boost sole-
noid using velcro to the chassis next to the chaincase.
Connect the 3/8 rubber hose from the charge tube
pito tube (location A) to the top top of the solenoid
(B). Connect the second rubber hose from the turbo
actuator (C) to the bottom of the solenoid (D). One
fitting on the solenoid is a vent and will be left open.
Connect the EBC harness to the solenoid. Secure the
clear chaincase vent tube with a zip-tie to ensure it is
routed away from the pipe.
64. Without EBC: Connect the 3/8 rubber hose from the
charge tube pito tube (location A) to the turbo actua-
tor (B). Secure the clear chaincase vent tube with a
zip-tie to ensure it is routed away from the pipe.
65. Install the supplied gasket and secure the turbo ex-
haust inlet to the turbocharger using the supplied
four nuts ad bolts.
66. Install the stock expansion chamber to the Y-pipe and
secure using the four supplied high tension springs.