BoonDocker POLARIS: 11-12 PRO 800 Turbo 3D Tuning - Manual (Page 5)

BoonDocker Performance – 2379 Heyrend Way, Idaho Falls, ID 83402 – 208-542-4411 / 877-522-7805
www.boondockers.com – email: [email protected] – fax: 208-524-7381
Revised 1-20-11 Copyright © 2010 Boondocker Page 5 of 14
2. Main Menu
The Main Menu is shown below:
Main  Fuel Stats
Menu N2O Map1U
The current selection is shown by the Right-Arrow and the cursor (underscore below the “F”). Use the arrow keys to
move the cursor. Move the cursor to the desired menu option and press the “SEL” key.
Fuel
Go to the Fuel adjust menus.
Stats
Display runtime data, captured data, and recorded maximum data.
N2O
Go to setup menus for optional Boondocker Nitrous kit or to set up the tuning feature.
Map
Go to the Map menu to store, lock, or change maps.
The current Map number is displayed as “Map1U”. This indicates that map number 1 is being used and it is Unlocked.
3. Boost Fuel Adjust Menus
This selection is used to make fuel adjustments. There are four Fuel adjust screens (examples shown below). Fuel screen1
will be displayed after moving the cursor to the Fuel selection on the Main Menu and pressing the “SEL” button.
Go to the next screen by pressing the “SEL” button. After pressing the “SEL” on the last Fuel adjust screen, you will
return to the Main Menu. Use the Left/Right Arrow keys to switch between settings. Use the Up/Down Arrow keys to
change the setting values. Sample Fuel adjust screens are shown below (actual RPM settings and number of screens may
be different for your model).
Fuel screen:
psi  LO MD HI
4300 08 10 00
3.1 Fuel Screens (RPM Adjustments)
In the RPM screens (1 and 2), the Fuel Control Box allows fuel adjustments to be made according to the following two
factors: RPM and Engine Load.
RPM Regions:
In the example above, the 3000 screen sets the fuel level for near 3000RPM down to idle. The 5000 screen sets the fuel
level for RPMs near 5000. (Higher RPM fuel numbers are fixed internally, but will actually be dominated by boost fuel
settings.) Between 3000 and 5000, the fuel adjustment will be proportioned between the two settings. For example,
suppose the 3000RPM fuel setting is at “4” and the 5000RPM fuel setting is at “8”. If engine is at 4000RPM, the actual
fuel adjustment made will be ½ of “4” and ½ of “8” which is “6”.
Throttle Position:
Each RPM Region is split into 3 throttle position ranges: closed throttle (idle) to 1/3 open, MD is 1/3 to 2/3 open, and HI is
2/3 to full open.
M1U

LO MD HI• • •
3000 00 00 00•••
Below is a description for each field show in the above sample screen: