BoonDocker POLARIS: Non-turbo Control Box 2011-12 PRO RMK 800 - Manual (Page 6)

BoonDocker Performance – 2379 Heyrend Way, Idaho Falls, ID 83402 – 208-542-4411 / 877-522-7805
www.boondockers.com – email: [email protected] – fax: 208-524-7381
Revised 1-20-11 Copyright © 2011 Boondocker Page 6 of 17
4. Map Menus
From the Main Menu, select Map1U to go to the Map Menu (shown below). This screen is used to
Load/Copy/Lock/Unlock saved “maps” that contain fuel and N2O settings. Five maps are available.
Lock ULock StUp

Load Copy Quit
4.1 Map: Load
When a new map is loaded, the current adjustment settings will be changed to the values from that map. To load a
new Map, first move the cursor to Load and press “SEL”. The following Load/Lock Menu appears:
Load 1 2 3 4 5

Q
Lock U U U U U Q
Load 1-5
Selects which map to load
Lock
L = Locked, U = Unlocked, applied to the map number the L or U is under
Q
Quits this menu
Use the Up/Down and Left/Right Arrow keys to move the cursor around. To load a new map, move the cursor to
the desired map number and press “SEL.” The map will be loaded and the Main Menu will be displayed. When a
map is loaded, Mx (x is the map number) is displayed in the Main and Fuel menus showing which map is loaded.
To quickly Lock or Unlock maps while in this screen, move the cursor down to the Lock row, place the cursor
under the letter under the desired map number, and press “SEL” to change from Locked to Unlocked or vice versa.
Select Q to Quit and return to the Main Menu.
4.2 Map: Copy
To copy a map, first select Copy from the Map Menu. The following Copy/Lock Menu will be displayed:
Copy 1 2 3 4 5

Q
Lock U U U U U Q
Copy 1-5
Selects which map to copy the current map TO
Lock
L = Locked, U = Unlocked
Q
Quits this menu
This screen is used to save the CURRENT fuel adjustment map TO one of five available map locations. The map
that is being copied TO must be Unlocked – otherwise a message will be displayed telling you that the map you
selected cannot be overwritten.
Note: When a map is copied, the Control Box will load the map copied TO as the new current map.
Use the Up/Down and Left/Right Arrow keys to move the cursor to the map number you want to copy TO and
press “SEL”. The following confirmation message will be displayed:
Overwrite Map A
With Map B? Y

N
“A” represents the map copied TO and “B” represents the current map (copied FROM). If this is exactly what you
intend, use the Left Arrow to underscore “Y” and press “SEL”. Now the current map is loaded into the selected
map number, the selected map number will become the current map, and the Main Menu will be displayed.
To quickly Lock or Unlock maps, move the cursor down to the Lock row, place the cursor under the L or U by the
desired map number, and press “SEL” to change a U (Unlocked) to an L (Locked) or vice versa.
Select Q to Quit and return to the Main Menu.
4.3 Map – Lock and ULock
Either Lock or ULock (UnLock) can be selected from the Map Menu to quickly lock or unlock the CURRENT
map. Move the cursor to the desired selection and press “SEL”. The box will return to the Main Menu and the
current map will be locked or unlocked when SEL is pressed.