Cuddeback C3000 - Manual (Page 11)

Longer Battery Life Faster Trigger Time
Page 10 of 20
APPENDIX A: CUDDEBACK ADVANCED MODE
After you feel comfortable using the E-Z Operating Mode you can enable ADVANCED Mode which will enable additional features.
Once you learn how to use E-Z Mode you will find ADVANCED Mode very similar. However, if E-Z Mode accomplishes
everything you need, you may continue to use E-Z Mode.
When to Use Advance Mode
Advanced Mode enables the following additional features you may find beneficial:
•
Enable event recording (an event is the date/time of activity that is stored in memory. You can send the events to the Compact
Flash card, and subsequently transfer them to a PC).
•
Enable selected time of day operation: day only, night only, or hours of day.
•
Enable password protection.
•
Write your name and phone number into Cuddeback’s memory.
•
Enable recording of video clips.
•
Turn the camera’s flash off or on as desired.
•
Enable time lapse photography.
To enable Advanced Mode:
1) Remove the batteries from Cuddeback.
2) Install the batteries.
3) When the display prompts [E-Z Mode / Change?] immediately press the (C KEY).
4) The display will prompt [ADV Mode] and then display the date/time.
To re-enable E-Z Mode:
1) Remove the batteries from Cuddeback.
2) Install the batteries.
3) When the display prompts [ADV Mode / Change?] immediately press the (C KEY).
4) The display will prompt [E-Z Mode] and then display the date/time.
POWER UP SEQUENCE
When batteries are first installed in Cuddeback the following will be displayed:
1) [E-Z Mode / Change?] or [ADV Mode / Change?] will be displayed to reflect Cuddeback’s selected operating
mode.
2) [Non Typical Inc] is displayed next. You can program your own name to appear on this display. You can bypass this
menu by pressing the (C KEY).
3) Password verification occurs next. The display will only appear if you have a password programmed.
a. [Enter LPW]
i. You will be required to enter a 5 digit password to continue. Reference the TheftStop Plus section of this
manual for instructions.
ii. When you first turn on Cuddeback a password is NOT programmed so this display will not appear.
4) The date and time is displayed next as des cribed in the next section .
MODE KEY FUNCTIONS
The mode key is used to view data stored inside the Cuddeback and to control/set the Cuddeback’s operating mode. With each press
of the (M KEY) one of four mode menus will be displayed (referred to as Mode:Stats, Mode:Image, Mode:Event, and
Mode:Operate).
Mode:Stats
The Mode:Stats menu is automatically displayed when Cuddeback energizes the display. You may not have to use the (M KEY) to
activate this display. The STATS menu allows you to view various statistic information stored inside the Cuddeback. Press t he (UP
KEY) or (DOWN KEY) to view a variety of s tatistical information.
1) Date/Time
a. Displayed in the format month/day/year hour/minute, an example display is [03/13/02 11:10 AM].
b. This is the setting o f Cuddeback’s internal clock.