Cuddeback C3000 - Manual (Page 13)

Longer Battery Life Faster Trigger Time
Page 12 of 20
d. Images are displayed in a low-resolution or high-resolution format depending on the global setting
Setup:Camera:ViewQuality (see ViewQuality later in this manual for more details).
3) Viewing Image Options
a. When viewing images you can select three or four optional tasks by pressing the (C KEY). Then you select one of
these tasks by pressing the (UP KEY) or (DOWN KEY). These options are Lock Image, Unlock Image, Clear
Image, and View in High Resolution. When the desired task is displayed pressing the (C KEY) will cause the task to
be performed.
b. Lock Image – [Lock Image?] will appear on line 1, and [C = Yes] will appear on line 2. Pressing the (C KEY)
will lock this image. Locking the image prevents this image from being erased by the CLEAR ALL IMAGE operation
described later.
c. Unlock Image – [Unlock Image?] will appear on line 1, and [C = Yes] will appear on line 2. Pressing the (C
KEY) will unlock this image. Unlocking the image will allow this image to be erased by the CLEAR ALL IMAGE
operation described later.
d. Clear Image – [Clear Image?] will appear on line 1, and [C = Yes] will appear on line 2. Pressing the (C
KEY) will clear this image. If a video clip was recorded it will also be deleted when you clear the image.
e. View in High Resolution – [View in Hi Res?] will appear on line 1, and [C = Yes] will appear on line 2.
Pressing the (C KEY) will cause the currently displayed low-resolution image to appear in a higher resolution. If you
have HIGH RESOLUTION viewing enabled this menu does not appear (see SETUP:CAMERA:VIEWQUALITY for
more details).
4) Images Saved Submenus :
a. Submenus allow you to Clear All Images, Archive Images, or View Images
i. When [Images Saved] is being displayed you can access the submenus by pressing the (C KEY). If
[Images Saved] is not displayed press the (M KEY) until it is.
ii. Press the (UP KEY) or (DOWN KEY) to select the appropriate submenu.
iii. Press the (C KEY) again to perform the desired submenu action.
5) Archive Images
a. This task allows you to save all images to an archive folder on the Compact Flash card. When Cuddeback records an
image it is saved in the folder \DCIM\CUDDY100. This task will move all images in the \DCIM\CUDDY100 to a new
folder named \DCIM\CUDDY101. The images in the folder \ DCIM\ CUDDY100 will be erased. This task allows you
to archive images after viewing them. Doing this will speed access to images and prevent having to scroll through
previously viewed images to view new images.
b. CAUTION: Once images are archived you CAN NOT view them with Cuddeback. The only way to retrieve these
images is with a Personal Computer.
c. Each time images are archived a new folder is generated; they will be named CUDDY101, CUDDY102, etc. This
becomes a very effective way to separate images as you move Cuddeback from place to place and acquire images over
time.
d. This submenu will be displayed as [Archive Images?] on line 1, and [C = Yes] on line 2. To perform this task
press the (C KEY) . To cancel the task press any other key, or press the (UP KEY) or (DOWN KEY) to go to the next
submenu.
e. To prevent accidental activations of this task you will be required to enter your lock password to complete the archive
task. The display will prompt [Enter LPW to Archive Images] on line 1, and <0 > on line 2.
f. To archive the images enter your lock password as described in the section TheftStop Plus, Password Entry. If you
make a mistake when entering the password or press a wrong key this task will be cancelled.
6) Clear All Images
a. This task allows you to erase all images in the active image folder \ DCIM\CUDDY100.
b. CAUTION: Once images are cleared you CAN NOT recover them!
c. This submenu will be displayed as [Clear All Images?] on line 1, and [C = Yes] on line 2. To perform this
task press the (C KEY). To cancel the task press any other key, or press the (UP KEY) or (DOWN KEY) to go to the
next submenu.
d. To prevent accidental activations of this task you will be required to enter your lock password to complete the Clear All
operation. The display will prompt [Enter LPW to Clear ALL Images] on line 1, and <0 > on line 2.