Cuddeback C3000 - Manual (Page 12)

Longer Battery Life Faster Trigger Time
Page 11 of 20
c. To access additional submenus press the (UP KEY) or (DOWN KEY).
d. To access additional Mode Key Menus press the (M KEY).
2) New Images
a. This is the number of photographs taken since you last checked your Cuddeback camera. This counter is incremented
every time Cuddeback triggers a photograph.
b. Displayed as [New Images] on line 1, with the number of images on the bottom line.
c. This counter is automatically cleared every time Live Camera Mode is activated.
3) Free Memory
a. This display shows the available space on the Compact Flash card.
b. Displayed as [Free Memory] on line 1, with space in Mega Bytes on the bottom line.
4) Master Counter
a. This display is the number of counts Cuddeback has detected.
b. Maximum number of counts is over 65,000.
c. Pressing the (C KEY) will clear this counter to 0.
d. Displayed as [Master Counter] on line 1, with number of counts on the bottom line.
5) Battery Level
a. This display shows the battery level of the 4 D Cell batteries.
b. Battery level reading is a number 1, 2, 3, or 4.
c. Fully charged battery is 4, weak battery is 1.
d. Replace your batteries when the reading is 1.
e. Displayed as [Battery Level] on line 1, with the level number on the bottom line.
6) Run Days
a. This is the number of days the Cuddeback has been operating since the batteries were installed.
b. This counter is automatically cleared when batteries are installed in the Cuddeback.
c. Displayed as [Run Days] on line 1, with the number on the bottom line.
7) Run Images
a. This is the number of images the Cuddeback has taken since the batteries were installed.
b. This counter is automatically cleared when batteries are installed in the Cuddeback.
c. Displayed as [Run Images] on line 1, with the number on the bottom line.
8) Lifetime Run Days
a. This is the number of days the Cuddeback has been operating since unit was manufactured.
b. Displayed as [Lifetime Run Days] on line 1, with the number on the bottom line.
c. This counter can never be cleared.
9) Lifetime Images
a. This is the number of images the Cuddeback has taken since the unit was manufactured.
b. Displayed as [Lifetime Images] on line 1, with the number on the bottom line.
c. This counter can never be cleared.
Mode:Images
The Mode.Images menus is used to determine the number of images saved, archive images, delete images, and view images on an
external TV or camcorder. A TV needs to be attached to Cuddeback’s TV connector using the appropriate cable (see section TV
Requirements for more details).
1) Press the (M KEY) until [Images Saved] is displayed on line 1. The number of images saved will be displayed on the
bottom line. From this display you can view images or activate submenus (see item 4 later).
2) Viewing Images
a. To view images you must attach a TV or camcorder to the TV connector on Cuddeback camera. Use a RCA video cable
that is compatible with your TV or camcorder. Refer to the documentation that came with the TV or camcorder for
details.
b. Press the (UP KEY) or (DOWN KEY) to display images on the TV.
c. You can select image options by pressing the (C KEY) as described next.