Cuddeback C3000 - Manual (Page 18)

Longer Battery Life Faster Trigger Time
Page 17 of 20
1) When you are required to enter the user name or phone number the LCD display will clear with only the firs t digit displayed. If
you are entering your name an “A” will be displayed, if you are entering your phone number, the “(”character will be displayed.
2) Follow these steps to program a name or phone number:
a) To increment the right most displayed digit press t he (DOWN KEY).
b) After correctly setting the right most digit, you advance to the next digit by pressing the (UP KEY). This digit can be
incremented by pressing the (DOWN KEY) .
c) Repeat the above two steps until the required digits are entered. You can enter up to 16 characters.
d) When you are finished, pressing the (C KEY) will cause the displayed characters to be programmed into Cuddeback. You
only need to enter as many characters as required; you DO NOT need to enter all 16 characters.
e) To cancel entering characters and cancel this operation press the (M KEY) or (S KEY) at any time before you press the
confirmation (C KEY) as describe in step d.
f) The message [Saved!] will appear on the LCD if you have programmed the owner name and phone number correctly.
Press the (S KEY) to continue.
There are 4 menus for setting up TheftStop Plus protection. They all work about the same, with just different data being entered.
Follow these steps for each menu that you want to change:
i)
The LCD display will show text on line 1, and [Change?] on line 2.
j) Press the (C KEY) if you want to change this setting. You can press the (S KEY) to advance to the next menu without
changing this setting.
k) The LCD display will clear and you can begin entering information as described above.
l)
The 4 menus items are:
i)
Owner Password – LCD line 1 will display [Owner PW], line 2 will show [Change?].
ii) Lock Password – LCD line 1 will display [Lock PW], line 2 will show [Change?].
iii) Owner Name – LCD line 1 will display [<the programmed name>], line 2 will show [Change?].
iv) Owner Phone Number – LCD line 1 will display [<the programmed phone number>], line 2 will show
[Change?].
m) Before you change any of the above 4 items you will first have to press the (C KEY), and then you will be prompted to
enter the Owner Password. You must enter the correct owner password to change these setting. The default owner password
is 00000 (five zeros). (You will have to enter this password even if you did not change the password from the default setting
of 00000).
n) When you enter a password, name, or phone number correctly, the message [Saved!] will appear on the LCD. Press the
(S KEY) to continue.
UTILITIES
These menus are used for special tasks. Use the (S KEY) to advance through the tasks.
a) Motion/Heat Sensor Sensitivity
i) You can change the sensitivity of Cuddeback’s motion/heat sensor. This allows you to optimize Cuddeback for various
conditions and requirements.
ii) Displayed as [Sense Level] on line 1, and the setting of [Low], [Standard], [High], or [Auto] on the
bottom line.
iii) Press the (UP KEY) or (DOWN KEY) to select the appropriate level.
iv) We recommend that you use Standard level for most situations. However, in hot weather High level can be used to
extend detection distances. Low level can be used to reduce detection distance to help keep night photos within the
range of the flash.
v) Auto level will program Cuddeback to automatically change the sensitivity level for day or night activity. During
daylight standard sensitivity is used. During dark periods low sensitivity is used . This limits Cuddeback’s detection
range to the distance of the camera’s flash.
b) Take a Picture – This command allows you to manually trigger an image in either a delayed timer mode, or instantly.
i) Delayed Timer Photo. Pressing the (C KEY) will start the time delay, the LED will begin to flash and in about 20
seconds the image will be taken. This provides time for you to put yourself in the photo. This feature can be used to
photograph yourself with your trophy.
ii) Instant Photo. Pressing the (C KEY) twice will cause Cuddeback to instantly take a photo.
c) Format Card – This command allows you to format the Compact Flash card. This will completely erase all files from the
Compact Flash card. CAUTION: ONCE FILES ARE ERASED THEY CAN NEVER BE RECOVERED! You will be
required to enter your Lock Password to complete this task.