Cuddeback NOFLASH - Manual (Page 15)

Step 2 - Enter the 5 numbers you want for the
lock password
7) The display should be [New LPW <0 >]
( figure 41 ). (LPW is the abbreviation for Lock
Password).
8) Enter the 5-digit number password you desire
using the method previously described.
9) After all 5 numbers are entered, press .
The display will prompt [RepeatPW <0 >]
( figure 42 ).
Step 3 - Repeat the 5 numbers for the lock
password
10) Enter the 5-digit number again, then press .
11) If both sequences of numbers are identical, the
display will prompt [Saved!] ( figure 43 ). If the
saved message does not appear, the password
was not programmed and you will have to
repeat the process.
12) Press to continue to set the Owner Name.
ENTERING THE OWNER NAME
You can program 16 characters that will be print-
ed onto the image. This can be your name or the
location of where the camera is setup.
TIP - You can cancel setting the
password at any point before
Saved! is displayed by pressing (S).
To disable password protection
program the Lock and Owner pass-
word with 00000 (five zeros).
New LPW
<0 >
Figure 41
Repeat PW
<0 >
Figure 42
28
Saved!
Figure 43
Step 1 - Enter the owner password to enable
changing the owner name
1) If you have just programmed the
Passwords, the Owner Name will be dis-
played. If not, perform steps 2 and 3.
2) Press numerous times until [Theft
Stop? C = Yes] appears on the LCD.
3) Press . The display will prompt [Owner
PW Change?].
4) Press numerous times until [Enter
Owner Name Change?] is displayed ( figure
44 ). (If you previously programmed the
owner name, that text would be displayed on
line 1).
5) Press . The display will prompt
[Owner PW <0 >].
6) Enter the owner password using the method
previously described. After all 5 numbers are
entered, press .
Step 2 - Enter the characters you want for the
owner name
7) The display will change to [A ] ( figure 45 ).
a. Press . The A will change to a B.
b. Press numerous times. The B will
continue to increment. Keep pressing
to see all the available characters.
29
TIP - Instead of programming your
name into Cuddeback, you can pro-
gram any text, such as location.
This will allow you to identify the
location of the images.
Enter Owner
Change?
Figure 44
LEARN - When entering the owner
name, (DOWN) changes the letter and
(UP) advances to the next position.
A
Figure 45
NoFlash07OwnerManual 11/6/07 3:26 PM Page 15