EFCO 5XP Series User Manual
Page 12
Advertising
EFCO CORPORATION 6/8/2012 PART NO. YW43
Page 12 of 34
5XP SLIDING GLASS DOOR INSTALLATION INSTRUCTIONS
3. Seal all exposed anchor heads. Seal between end dam and structure. Seal sill starter to end
dam joint as shown. 14G0 sill starter is shown; 14B4 is similar. (See Fig. G)
The sill starter is now ready to install the Sliding Glass Door frame.
(See the assembly instructions (SECTION III) for assembly of the Sliding Glass Door frame)
Sealant on anchor heads
Seal across face of
end dam to sill starter.
Fig. G
Advertising