ETS-Lindgren 4340 CCTV Systems - Manual (Page 25)

Install the 10/100 Ethernet Filter | 25
5.0 Install the 10/100 Ethernet Filter
Before installing any components, follow the
safety information in the ETS-Lindgren
Product Information Bulletin included with your
shipment.
See the 10/100 Ethernet Filter Installation Manual for the
pre-installation requirements and installation instructions for the filter.
They are not included in this document.
If you do not install an on/off power switch, the camera is powered on
at all times.
This does not apply to battery-operated cameras in a multi-camera
configuration.