ETS-Lindgren 4340 CCTV Systems - Manual (Page 52)

52 | Operation
4. Enter the title of the camera, using a maximum of 20 characters. The
camera title will display on the multi-screen.
Do not use these characters in the camera title:
 "
 &
 When selecting a 16-split screen, some characters of the camera title
may not display.
 The multi-screen will display in 4:3 aspect ratio even when 16:9 is
selected.
5. Complete Setup information. Enter the rest of the setup information
on the camera home screen, as desired.
Setting Resolution & Frame Rate
1. Power up all cameras. Allow cameras to complete self-test routine.
2. Click Setup and then click General. The settings window will display.
3. Set Resolution to the desired setting and then click Save. Set and
save the resolution setting before setting the frame rate.
Optical zoom increases when using a lower resolution.
4. Set Frame Rate to 30 and then click Save. Set and save the
frame rate.
5. Close the settings window.