ETS-Lindgren 4340 CCTV Systems - Manual (Page 45)

Install Optional Components | 45
M ULTI -C AMERA S YSTEM
—A
DDITIONAL P RE - INSTALLATION T ASKS
For a multi-camera configuration, you will need to install one
10/100 Ethernet filter per camera, in addition to mounting the cameras.
 Install filters — Follow the 10/100 Ethernet filter installation
instructions in the separate document, 10/100 Ethernet Filter
Installation Manual. They are not included in this document.
 Mount cameras —Follow the instructions to wall-mount or
ceiling-mount a camera on page 29.
If you have a shielded control room, also install fiber optic feedthrough
connectors in the wall of the control room.
M ULTI -C AMERA S YSTEM
—I
NSTALLATION T ASKS
1. Place the 10/100 network switch in the same location as the personal
computer.
2. Plug the Ethernet cable from the computer into any of the numbered
connectors on the network switch.