ETS-Lindgren 7606 Coil Antenna/Shielded Coil - Manual (Page 31)

Testing EUT for susceptibility (immunity) consists of three processes: starting the
EUT, selecting test frequencies (may be done semi automatically), and testing
the EUT at the selected frequencies (done manually).
S TART THE EUT
Turn on the EUT, allow it to stabilize, and then verify it is operating properly.
Make sure the input/output stimulation and monitoring equipment is operating
satisfactorily.
S ELECT T EST F REQUENCIES
Testing – Showing Application of Model 7605
1. Position the Model 7605 so that the built-in spacer is flat against one
surface of the EUT. This places it parallel to and 5 cm from the EUT.
MIL-STD-462D Method RS101 Testing | 31