ETS-Lindgren 7606 Coil Antenna/Shielded Coil - Manual (Page 9)

1.0 Introduction
The ETS-Lindgren Model 7605 Radiating Loop and Model 7606 Radiating
Sensor are provided as a set, and are used together for the test equipment
calibration described in Method RS101 of MIL-STD-462D. Model 7605 is used
separately during susceptibility (immunity) testing of Equipment Under
Test (EUT).
Use the included nylon bolt to connect the Model 7605 and
Model 7606 together. Do not use a metallic bolt or calibration will be
inaccurate.
Shown unassembled Shown assembled
Introduction | 9